Two Warne risers share a *2.26-inch* sightline
Warne pairs a 0.90-inch riser with XPS-height sights and a 0.67-inch version with EXPS-height sights. The base and Canadian supply route decide the order.
Warne's two new Picatinny risers take different routes to the same stated 2.26-inch optical centreline. The 0.90-inch version suits EOTECH XPS-height sights; the 0.67-inch version suits EXPS-height sights. Choosing between them starts with the base already under the optic.
The company's November 10 announcement presents a higher, heads-up sight position and compatibility with accessories designed for that centreline. For a Canadian buyer, the useful question is whether the complete arrangement fits the rifle, the magnifier, and the person behind them. Warne's own web checkout adds a separate constraint: its FAQ says orders ship to US addresses only.
I pay attention to where my head ends up behind an optic. When I am thinking through a mounting change, I want to know what happens to the whole arrangement. A small aluminum block can start a surprisingly long accessory conversation. With these two, a single extra E in the sight's name changes the part number.
Two part numbers for one target
The 6114M provides 0.90 inch of lift and is specified for XPS-height optics. The 6115M provides 0.67 inch and is specified for EXPS-height optics. Warne gives both an eight-slot Picatinny top rail and describes them as lightweight aluminum mounts. Listed weights are 2.3 ounces and 2.0 ounces, respectively.
Those are two separate products with different physical heights. Warne's release supplies the common 2.26-inch optical target. Keeping the lift and the final sightline separate prevents an easy ordering mistake: buying the taller block because the desired sightline sounds tall.
The part-number pairing also matters when a seller lists several Warne red-dot mounts together. A brand name and a Picatinny description leave room for different heights and interfaces. For this purchase, I would put the exact sight model beside 6114M or 6115M in the order discussion.
The base already adds height
EOTECH's current XPS2 page identifies a cross-bolt attachment and rear buttons. Its EXPS2 page identifies an adjustable, locking quick-detach lever and side buttons. These sights have different mounting arrangements before another component goes underneath them.

Warne accounts for the sight-height difference with the two riser options. Its descriptions use "XPS-height" and "EXPS-height," which give the buyer a specific reference point. For a different sight, I would ask for confirmation of the resulting optical height with that exact model. A broad "fits most" description can establish the attachment category while leaving the finished height unresolved.
The existing base also affects the space the complete setup occupies. EOTECH describes the EXPS2's side buttons as useful when pairing it with a magnifier. That is worth preserving in the fit check: a sight and magnifier need usable positions and accessible controls once their mounts share the rail.
The magnifier belongs in the same decision
Warne says the new risers work with accessories, including magnifiers, designed for the 2.26-inch centreline. The height qualification carries the useful information. A magnifier's brand name or magnification alone gives an incomplete answer about its mounting position.
If I were changing an existing sight-and-magnifier arrangement, I would identify the mount under each component before ordering. The relevant comparison is the finished optical height of both pieces. The seller should be able to name the actual combination and any mounting pieces needed to bring it together.
That makes this a whole-setup purchase even when the invoice contains one small riser. An otherwise satisfactory magnifier mount can become another item to resolve when the sight moves higher. Keeping the existing setup is a sensible alternative if it already provides the head position and access I want.
A heads-up position still has to suit the shooter
Warne links its higher position to faster, more consistent target acquisition. That is the manufacturer's performance claim. I have not fitted or shot either riser, so there is no Holdover speed, recoil, durability, or return-to-zero result behind this article.
The argument for considering one is more modest: a shooter who wants a higher sightline now has two specified options for these different sight heights. Whether that position improves the experience depends on the existing rifle and how the shooter uses it. Someone satisfied with the present arrangement has a good reason to leave it alone.
My buying test would be a comfortable position with the complete optic setup, followed by confidence in the exact mounting combination. The fashionable number can wait while those questions get answered.
Canada's order needs a seller route
The product pages' embedded pricing identifies US dollars. More consequentially, Warne's current shipping FAQ says its web orders go to US addresses only. A Canadian reader looking at the maker's available inventory still needs another route to an order here.
This source check did not establish Canadian stock, a Canadian-dollar price, or a delivery date for either new part number. That leaves a straightforward enquiry for a Canadian seller: which exact riser can you supply, what is the quoted total, and who handles a fit problem or support request?
I would want those answers together with the sight and magnifier details. For an XPS-height owner considering the new arrangement, the starting part is 6114M; for an EXPS-height owner, it is 6115M. The order becomes useful when the seller can connect that part number to the equipment already on the rifle and a Canadian supply commitment.
The free weekly Dispatch brings together Canadian gear research, precision shooting, and the week's useful Holdover reporting. Read The Dispatch.
Sources
- Warne manufacturer announcement: new 2.26-inch Picatinny red-dot risers, November 10, 2026.
- Warne 6114M, 0.90-inch Picatinny riser, checked November 11.
- Warne 6115M, 0.67-inch Picatinny riser, checked November 11.
- EOTECH XPS2 product specifications, checked November 11.
- EOTECH EXPS2 product specifications, checked November 11.
- Warne FAQ, web orders and shipping, checked November 11.